
Electrician in Waverton
Switchboards, fault finding and EV chargers for Waverton's harbourside houses and low-rise apartments, from Balls Head Reserve to the village shops.
What we actually see in Waverton
Waverton is a mix of Federation and inter-war houses on the streets closest to Balls Head Reserve and the harbour, with low-rise strata blocks nearer the station and village shops — quieter and more house-heavy than Kirribilli or Milsons Point just around the point.
The harbourside houses show the same salt-air wear as Mosman and Cremorne Point — switchboards and outdoor fittings facing the water corrode faster, and it's common to find an original board that's simply reached the end of its life rather than failed outright.
We also do a reasonable amount of heritage-sensitive rewiring here — Federation homes with original rubber or VIR-insulated cabling that needs replacing discreetly, without opening up more of the house than necessary.
What we're called out for in Waverton
Switchboard upgrades
Ceramic fuses and boards without safety switches replaced.
Fault finding
Tripping, no power, flickering — diagnosed with test equipment.
EV charger installation
Including what strata will and won't let you do.
Downlights & LED lighting
Halogen conversion with correct insulation clearance.
Safety switches & smoke alarms
RCDs and alarms to current NSW requirements.
Rewiring & renovations
Partial and full rewires where the wiring has had its day.
Nearby suburbs we also cover
Waverton questions
Our Waverton switchboard is corroded but not that old — why?
Salt air off the harbour affects houses close to Balls Head Reserve and the water more than you'd expect inland. Combined with an original board simply reaching the end of its working life, corrosion here shows up earlier than in a suburb further from the water.
We have original wiring in our Federation home — can you rewire it without major disruption?
Yes, it's routine work for us. We plan cable runs to minimise wall and ceiling access, replacing old rubber or VIR-insulated cabling discreetly rather than opening up more of the house than needed.
Who pays for switchboard repairs in a Waverton strata block — us or strata?
The sub-board inside your lot is your responsibility; the meter room and the mains feeding it are the owners corporation's. We can tell you which side of that line a fault falls on.
Why does my safety switch trip with nothing plugged in?
Usually a fault in the fixed wiring or an appliance drawing current while switched off. We test circuit by circuit to find the actual cause.
What customers say
Jason was great! One call and less than an hour later, he was here to save the day. Five stars for the prompt and reliable service.
Jason onsite quickly and completed the work on the spot, giving us a good price and was very polite. Would highly recommend.
Fantastic service! Friendly, efficient and well priced. Highly recommend. Thank you for swiftly fixing our switches.
These are Google reviews for our team at Cync Electrical & Automation — the licensed contractor behind North Shore Electrical & Automation. 5.0 from 20 reviews. — see the profile
Need an electrician in Waverton?
Send us the details, or call 0422 253 379.